rus
Констанца
11:37
Control valve with 8 pressure regulator
Control valve with 8 pressure regulator - фото 1 Control valve with 8 pressure regulator - фото 2 Control valve with 8 pressure regulator - фото 3
Обновлено: 13 ноября 2019, 07:49

Control valve with 8 pressure regulator

1 500 $/штука
Условия поставки: EXW Запорожье
Смаилов Роман Николаевич
отдел маркетинга
,  Запорожье, UA
на Флагма с 28 января 2016

Описание

Application
Designed to stabilize and reduce pressure in the water supply network, thereby protecting pipeline and equipment connected to it from high pressure.
Operating principle Closed upward flow of water presses on the outer chamber of the hose, brings the hose into hydraulic balance and closes the flow By pressing of the sleeve on the center saddle. While opened water pressure is released from the sleeve chamber, allowing the valve to open.
Manual control
All valves are equipped with a three-way manual selector valve. Manual open / close control is used to open or close. The valve. The flow through the valve is controlled by a rubber sleeve, which is driven by hydraulic pressure. The valve is positioned either in the full open or closed position. Auto position on the selector does not affect valve control, but is used, when the valve is equipped with automatic control.
Automatic control
Additional solenoid for electrical control of the valve. If the valve is equipped with an electric solenoid, the open / close function may be automatic using an electric controller. When the selector is in auto position, the electric solenoid is used to automatically open or close the valve. 3-way electric solenoid must be turned on to open the valve and de-energized to close the valve. Positioning of the manual selector to open or close cancels the auto control.
Pressure regulation
Pressure control valves react or respond through a pressure regulator. The pressure regulator directs the flow of water, which installs the clutch during operation. If the control function is to reduce pressure, the position of the sleeve (or flow through the valve) is controlled by downstream pressure. If the control function maintains or relieves pressure, the position of the sleeve is adjusted by inlet pressure.

Номер объявления: 1673720   |  просмотров: 4  
,  Запорожье, UA
на Флагма с 28 января 2016

Похожие объявления

4
1 530 $/шт EXW
Полигон-авто, ООО, UA +4 объявления
Designed for filtration of irrigation water from a distribution network, supplied to stationary circular, mobile and frontal irrigation machines....
2
441 $/шт EXW
Полигон-авто, ООО, UA +4 объявления
Application and intallation Filter is designed for the installation on suction system of pump stations with capacity up to 350 CBM/hr. Allows to...
3
4 500 $/шт EXW
Полигон-авто, ООО, UA +4 объявления
Is intended to be installed on a suction system of pumping stations with productivity up to 450 cubic meters. It allows to take water from open...
Показать еще
Свяжитесь с компанией
Смаилов Роман Николаевич
отдел маркетинга
По телефонам
В мессенджерах
Скажите, что нашли объявление на Флагма
Написать сообщение
Выбрать раздел
×
Вход в личный кабинет